Introduction | |
---|---|
Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection EPO Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Serial connectivity Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. USB connectivity Provides management of the UPS via a USB port (not available on all models). Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. SmartSlot Customize UPS capabilities with management cards. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Network manageable Provides remote power management of the UPS over the network. LED Indicators Provide easy-to-read status of the unit and utility power conditions. Serial connectivity Provides management of the UPS via a serial port. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Audible alarms Provides notification of changing utility power and UPS power conditions Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Double conversion on-line topology Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source. ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Management Software Allows you to easily monitor your utility power and manage your UPS. SmartSlot Customize UPS capabilities with management cards. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Wide input voltage range Designed for harsh electrical environments to save battery life. Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High efficiency High efficiency rates that remain stable even at lower operating power levels USB connection Use your PC to access additional power protection and management features for your UPS via a USB Port. Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring. Management Software Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. |
|
Features | |
UPS topology | Double-conversion (Online) |
Output power capacity | 10 kVA |
Output power | 10000 W |
Waveform | Sine |
Input operation voltage (min) | 220 V |
Input operation voltage (max) | 240 V |
Input frequency | 40 - 70 Hz |
Output operation voltage (min) | 220 V |
Output operation voltage (max) | 240 V |
Surge energy rating | 600 J |
Crest factor | 3:1 |
Emergency Power Off (EPO) | Y |
Audible alarm(s) | Y |
Audible alarm modes | Alarm when on battery, Low battery alarm, Overload alarm |
Battery | |
Battery technology | Sealed Lead Acid (VRLA) |
Design | |
Form factor | Tower |
Product colour | Black |
Display type | LCD |
Certification | CE, IEC 62040-1-1, IEC 62040-1-2, REACH |
Operational conditions | |
Operating temperature (T-T) | 0 - 40 °C |
Operating relative humidity (H-H) | 0 - 95% |
Storage relative humidity (H-H) | 0 - 95% |
Operating altitude | 0 - 3000 m |
Non-operating altitude | 0 - 14763.6 m |
Technical details | |
Sustainability certificates | RoHS |
Weight & dimensions | |
Width | 190 mm |
Depth | 447 mm |
Height | 685 mm |
Weight | 65 kg |
Package width | 320 mm |
Package depth | 580 mm |
Package height | 910 mm |
Package weight | 77 kg |
Packaging data | |
Cables included | USB cable |
Manual | Y |
Software CD | Y |
Other features | |
Output voltage | 230 V |
Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.