Introduction | |
---|---|
Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Audible alarms Provide notification of changing flywheel conditions InfraStruXure Central compatible Enables centralized management via APC InfraStruXureŽ Central. SmartSlot Customize UPS capabilities with management cards. Cold-start capable Provides temporary battery power when the utility power is out. Serial Connectivity Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. Resettable circuit breakers Enables a quick recovery from overload events. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power and UPS conditions. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) USB connectivity Provides management of the UPS via a USB port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Network manageable Provides remote management of the UPS over the network. Adjustable voltage sensitivity Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. |
|
Features | |
UPS topology | Line-Interactive |
Waveform | Sine |
Input operation voltage (min) | 151 V |
Input operation voltage (max) | 302 V |
Input frequency | 50/60 Hz |
Output operation voltage (min) | 220 V |
Output operation voltage (max) | 240 V |
Automatic Voltage Regulation (AVR) | Y |
Surge energy rating | 459 J |
Hold time (max) | 2 ms |
Efficiency | 98.6% |
Emergency Power Off (EPO) | O |
Noise level | 46 dB |
Surge protection | Y |
Audible alarm(s) | Y |
Auto-restart | Y |
Ports & interfaces | |
AC outlet types | C13 coupler |
Power plug | C14 coupler |
AC outlets quantity | 4 AC outlet(s) |
Number of output IEC jumpers | 2 |
USB port | Y |
Serial interface | Y |
Serial interface type | RJ-45 |
SmartSlot | Y |
Battery | |
Battery technology | Sealed Lead Acid (VRLA) |
Battery capacity | 432 VAh |
Typical backup time at full load | 7.2 min |
Typical backup time at half load | 25.8 min |
Battery life (max) | 6 year(s) |
Battery recharge time | 3 h |
Hot-swap battery | Y |
Automatic battery test | Y |
Cold start | Y |
Design | |
Form factor | Rackmount |
Rack capacity | 2U |
Product colour | Black |
LED indicators | Status |
Certification | CE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, TUV, VDE, REACH, PEP, EOLI |
Operational conditions | |
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 45 °C |
Operating relative humidity (H-H) | 0 - 95% |
Storage relative humidity (H-H) | 0 - 95% |
Operating altitude | 0 - 3000 m |
Non-operating altitude | 0 - 15000 m |
Technical details | |
Sustainability certificates | RoHS, ENERGY STAR |
Weight & dimensions | |
Width | 432 mm |
Depth | 457 mm |
Height | 86 mm |
Weight | 28.6 kg |
Package width | 594 mm |
Package depth | 603 mm |
Package height | 251 mm |
Package weight | 31.9 kg |
Packaging data | |
Rack mount kit | Y |
Cables included | RS-232, USB cable |
Quick installation guide | Y |
Software CD | Y |
Logistics data | |
Products per pallet | 8 pc(s) |
Other features | |
Nominal output voltage | 230 V |
Nominal input voltage | 230 V |
Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.