Industrial Managed PoE+ Switch 8 x 10/100/1000TX PoE+ ports and 2 x 100/1000X SFP

Industrial Managed PoE+ Switch  8 x 10/100/1000TX PoE+ ports and 2 x 100/1000X SFP
Brand: ALLIED TELESIS
Part Number: AT-IE210L-10GP-60
Stock:
Real time Stock Check

£997.60 (Excl VAT)
£1,197.12  (incl. VAT)

ALLIED TELESIS
Introduction
The Allied Telesis IE210L Series of Industrial-Lite Ethernet Gigabit Layer 2 switches are built for enduring performance at high ambient temperatures, making them ideal for indoor IoT applications and physical security.

The Allied Telesis IE210L Series are wire-speed Layer 2 switches for industrial-lite Ethernet applications. With Power over Ethernet Plus (PoE+), and support for high operating temperatures of up to 65°C, IE210L switches tolerate the harsh and demanding environments found in industrial deployments.

These high-performing, cost-effective switches provide network managers with several key features, including port-based VLANs, IEEE 802.1p, QoS, port trunking/link aggregation, port mirroring, priority queues, and IEEE 802.1x security support.

With support for up to 16K MAC addresses, the IE210L Series is the ideal option for integrating management into any network solution.

Device management is provided via an industry-standard CLI, web-based Graphical User Interface (GUI), SNMP, Telnet and SSH, as well as the Allied Telesis Autonomous Management FrameworkT (AMF).

Powerful network management
AMF meets the increased management requirements of modern converged networks, automating many everyday tasks including configuration management. AMF has powerful centralized management features that manage a complete network as a single virtual device. The network can be expanded with plug-and-play simplicity, and network node recovery is fully zero-touch. AMF secure mode increases network security with management traffic encryption, authorization, and monitoring. AMF Guestnode allows third-party devices, such as security cameras, to be part of an AMF network.

Secure
Network security is guaranteed, with powerful control over network traffic types, secure management options, and other multi-layered security features built right into the IE210L.

Network Access Control (NAC) gives unprecedented control over user access to the network, in order to mitigate threats to network infrastructure.

Allied Telesis IE210L switches use 802.1x port-based authentication, in partnership with standards-compliant dynamic VLAN assignment, to assess a user's adherence to network security policies and either grant access or offer remediation. Tri-authentication ensures the network is only accessed by known users and devices, while secure access is also available for guests.

Security from malicious network attacks is provided by a comprehensive range of features, such as DHCP snooping, STP root guard, BPDU protection and Access Control Lists (ACLs). Each of these can be configured to perform a variety of actions upon detection of a suspected attack.

Network protection
Advanced storm protection features include bandwidth limiting, policy-based storm protection and packet storm protection.

Network storms are often caused by cabling errors that result in a network loop. IE210L switches provide features to detect loops as soon as they are created. Loop detection and thrash limiting take immediate action to prevent network storms.

Network resiliency
The convergence of network services in the Enterprise has led to increasing demand for highly-available networks with minimal downtime. The IE210L Series supports highly-stable and reliable network switching with a recovery time of less than 50ms.

You can customize the IE210L with the most appropriate mechanism and protocol to prevent network connection failure. Choices include Allied Telesis Ethernet Protection Switched Ring (EPSRingT), and the standard ITU-T G.8032.

Future-proof
The IE210L switches are Software-Defined Networking (SDN) ready and are able to support OpenFlow v1.3.
Management features
Switch type Managed
Switch layer L2
Quality of Service (QoS) support Y
Web-based management Y
Traffic classification Y
ARP inspection Y
Configuring Location Settings (CLI) Y
System event log Y
MIB support Comprehensive SNMP
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 8
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (copper) ports quantity 8
SFP module slots quantity 2
Power connector AC-in jack
Network
Networking standards IEEE 802.1Q,IEEE 802.1ad,IEEE 802.1v,IEEE 802.2,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z
10G support N
Copper ethernet cabling technology 10BASE-T,100BASE-FX,100BASE-T,1000BASE-LX,1000BASE-SX,1000BASE-T
Port mirroring Y
Full duplex Y
Policy-based routing Y
Flow control support Y
Link aggregation Y
Spanning tree protocol Y
VLAN support Y
Virtual LAN features Policy-based VLAN,VLAN Identifier ( VLAN ID)
Number of VLANs 2048
Data transmission
Switching capacity 20 Gbit/s
Forwarding rate 14.9 Mpps
MAC address table 16000 entries
Latency (10-100 Mbps) 55 µs
Latency (1 Gbps) 7.8 µs
Latency (10 Gbps) 3.4 µs
Number of queues 8
Static route Y
Jumbo frames support Y
Jumbo frames 10000
Security
DHCP features DHCP client,DHCP relay,DHCP server,DHCP snooping,DHCPv6 client,DHCPv6 relay
Access Control List (ACL) Y
IGMP snooping Y
Security algorithms 802.1x RADIUS,HTTPS,MD5,PEAP,SSH,SSH-2,SSL/TLS,TTLS
MAC address filtering Y
SSH/SSL support Y
Loop protection Y
BPDU filtering/protection Y
Authentication MAC-based authentication, Port-based authentication, Web-based authentication
Authentication type IEEE 802.1x,Network Access Control (NAC),RADIUS
MAC address entries Blackhole MAC address entries
Multicast features
Multicast support Y
Multicast MAC address table 512 entries
Multicast Listener Discovery (MLD) snooping MLDv1 and v2
Design
Rack mounting Y
Stackable Y
Product colour Grey
LED indicators Y
Electromagnetic compatibility EN55032 class A, FCC class A, VCCI class A, ICES-003 class A, EN55024, EN61000-3-2 (harmonic), EN61000-3-3 (flicker)
Certification UL, cUL, UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1
Performance
Memory type DDR3-SDRAM
Internal memory 512 MB
Flash memory 128 MB
Noise level 33 dB
Harmonized System (HS) code 8517.62.0050
Power
Power supply included Y
AC input voltage 100 - 240 V
AC input frequency 50/60 Hz
Input current 2.4 A
Power consumption (max) 16 W
Power over Ethernet (PoE)
Power over Ethernet (PoE) Y
Power over Ethernet (PoE) ports quantity 8
Power over Ethernet plus (PoE+) ports quantity 4
Power over Ethernet (PoE) power per port 15 W
Total Power over Ethernet (PoE) budget 124 W
Operational conditions
Operating temperature (T-T) 0 - 65 °C
Storage temperature (T-T) -30 - 70 °C
Operating relative humidity (H-H) 5 - 95%
Storage relative humidity (H-H) 5 - 95%
Operating altitude 0 - 3048 m
Heat dissipation 128 BTU/h
Weight & dimensions
Width 210 mm
Depth 275 mm
Height 42.5 mm
Weight 2.1 kg
Packaging data
Package width 430 mm
Package depth 360 mm
Package height 150 mm
Package weight 3.45 kg
No options for this product


Partners

Every effort has been made to ensure the accuracy of all information contained herein. e-nitiative shall not be liable for any changes resulting in wrong product description, tax code and/or price. The shown information (specifications, prices, taxes) should be considered as an indication and can be changed at any moment and without any prior notice.

Call us Now: 02920 333 000

Call us Now: 02920 333 000